1-26. MAKING COPY.
To make a copy negative, proceed as follows:
a. Insert a loaded film holder into the focusing back.
NOTE: The slide of the film holder that faces the lens must have the
bright side out, indicating unexposed film.
b. Release the locking screw on the film holder and remove the slide from
the film holder.
c. The cable release should be used for all exposures to reduce camera
movement.
(1)
For exposures of 1 second to 3 seconds, proceed as follows:
(a)
Set the shutter index mark to B (Bulb).
(b)
Press the cable release plunger to open the shutter.
Do
not release.
(c)
Allow the calculated time to pass.
(d)
Release the plunger.
(2)
For exposures of 4 or more seconds, proceed as follows:
(a)
Set the shutter index to T (Time).
(b)
Press the cable release plunger to open the shutter.
(c)
Release the plunger.
(d)
Allow the calculated time to pass.
(e)
Press the cable release plunger a second time to close
the shutter.
d. Replace the slide in the film holder with the black (dull) side of the
slide out, to indicate the film has been exposed.
e. Set the locking screw on the film holder to
hold
the
slide
in
position; remove the film holder from the focusing back.
74
Previous Page
