d. Replace the housing assembly and feed shelf (para 36d and e).
38
Initial Adjustment of Equipment
a. 60 Hz drive gear removal for 50 Hz operation. The print processor
is equipped for operation with the 60 Hz drive gear (figure 312) when
supplied as part of the ES82A (TM 11678022512, Appendix A).
(1) To remove the 60 Hz drive gear, release the gear latch and remove
(2) Pull off the Teflon retaining washer and slide the 60 Hz drive gear
from the drive shaft, being careful to catch the gear drive pin as it falls
from the drive shaft.
FIGURE 312. 60 Hz drive gear removal.
198