Digital Input Rates .......... 16 or 32 kb
Pulse Rate ................... 576 kHz
Loop Impedance ............... 600 ohms
Line Impedance ............... 91 ohms
Power Requirements ........... 115 VAC, 50 or 60 Hz, 30 W
Weight ....................... 39 lbs.
(3) Pulse form restorer TD-206B/G. The TD-206 is an unattended
in-line signal restorer.
It receives potentially distorted input
signals and restores them to their originally generated form.
You
may install up to 39 TD-206s in the cable transmission line. Figure
1-17 illustrates the TD-206B/G.
Figure 1-17,.
Pulse form restorer TD-206B/G
Technical Characteristics
Power Requirement ........... 11.3 volts direct current (VDC)
supplied by the TD-204 or TD-754
via a special purpose cable
CX11230 or CX-4245
Weight ...................... 2.04 lbs.
4.
Configurations.
The equipment we have discussed so far may be sequenced in a variety
of configurations to accomplish the desired mission. We will concern
ourselves with five basic configurations used in low and medium
capacity multichannel communications systems.
1-22
SS0016
Previous Page
