FIGURE 12.
MANUAL START OF MEP-016A.
(6) Set the engine RUN-OFF switch to RUN position.
(a) Put the choke in about a 3/4-closed position.
(b) Make one pull of the starter rope with a quick, steady
motion.
(c) If the engine starts, move the CARBURETOR control to
GOVERN or RUN position and open choke as steady engine operation
permits.
(d) If the engine does not start, close choke to full. Take
one pull of starter rope. If engine starts, move choke to about 1/2-
position and move the carburetor control to GOVERN or RUN position.
Run engine at 1/2-choke, then open choke as steady engine operation
permits.
CAUTION
UNNECESSARY OR EXCESSIVE USE OF THE
CHOKE
CAN
CAUSE THE LUBRICATING OIL TO DILUTE.
16
Previous Page
