h. Operation. The MEP-016A operates at 3600 RPM IAW the governor
setting.
The operator must know how to perform all generator set
operations.
Instructions to operate and regulate the generator set
are given below. (See Figure 13.)
FIGURE 13.
OPERATING INSTRUCTIONS FOR MEP-016A.
(1) Place circuit breaker in the OFF position and turn VARIABLE
RESISTOR knob counter-clockwise until it stops.
(2) Place OUTPUT SELECTOR switch in desired position.
(3) Start the generator set.
(4) Place GOVERNOR control in GOVERN position.
(5) Set
the
VOLTAGE
SELECTOR
switch
compatible
to
the
connections at the load terminals.
The output between any
two
terminals will be indicated on the voltmeter.
For example, if
the
voltage selector is set on V 1-2, it will cause an indication on
the
voltmeter, reflecting the voltage output between load terminals 1
and
2.
17
Previous Page
