(7) Hold START/STOP
switch
in
START
position
until
engine
starts. (See Figure 33.)
CAUTION
DO NOT HOLD START/STOP SWITCH IN START POSITION
LONGER THAN 15 SECONDS.
ALLOW STARTER COOLING
PERIOD OF 1 MINUTE BEFORE ATTEMPTING TO RESTART.
FIGURE 33.
START/STOP SWITCH.
(8) Adjust CHOKE control, as necessary, as engine warms up.
(See Figure 32.)
(9) Position GOVERNOR control in GOVERN/RUN position. Bring to
rated speed and allow engine to warm for 3 minutes. (See Figure 30.)
c. Start generator set manually.
(1) Position FUEL SELECTOR switch to desired position.
(2) Position oil pan baffle rod in the
proper
position,
depending on ambient temperature. (See Figure 28.)
(3) Position air cleaner intake shutter in the proper position,
depending on ambient temperature. (See Figure 29.)
49
Previous Page
