9.
Replacing the apron on the EL-5(2) through EL-5 (5).
a. Removal (fig. 3-15).
(1) Remove the spring-loaded guide tubes (1) by pushing each guide tube back against its guide
tube retainer spring (2) and slipping the free end from its seating.
Figure 3-15. EL-5(2) through EL-5(5) left front side, partial exploded view
(2) On the EL-5(2) and EL-5(4), remove the screws (3) and the locks (4) that secure the
squeegee roller bearings (attached to the ends of the squeegee roller (5) to the cradle (22)).
50
Previous Page
