Figure 4-2. Motor and pulleys (motor cover removed)
b. Remove the driven pulley by unscrewing one squarehead setscrew in the pulley.
c. Remove the stuffing box cap.
CAUTION: The stuffing box cap has a left-hand thread.
d. Remove the stuffing box gland and apply several drops of oil (OE-30) to the packing.
e. Wipe off excess oil.
f. Replace the stuffing box gland on the shaft and screw the left-hand threaded stuffing box cap into
place.
g. Tighten the cap and then back it off one-half turn on adjustment.
h. Replace the driven pulley. Secure it to the shaft with the square-head setscrew.
69
Previous Page
