b. Loading 8" x 10" filmholders (figure 9).
The following procedures
apply to each of the 8" x 10" filmholders.
FIGURE 9.
Loading 8" x 10" filmholder.
(1) Place the filmholder on a clean work surface.
(2) Follow the procedures in a(1) through (6) above.
EXERCISE
20. When following prescribed loading steps of a cut filmholder, where are
the notches on the film located when you insert the film into the
filmholder?
a.
Upper right-hand corner.
b.
Lower right-hand corner.
c.
Lower left-hand corner.
d.
None of the above.
25
Previous Page
