22. Which of the following operations will cause the light assemblies to
glow dimly?
a.
Set KELVIN TEMPERATURE switch to #1.
b.
Set MANUAL-TIMER switch to REMOTE TIMER OPERATION.
c.
Set MAIN POWER switch to ON.
d.
Set MAIN POWER switch to OFF.
2-6
Loading Easel Horizontal Operation
For horizontal operation, the easel can be loaded with standard size
rigid copy (a below), with nonstandard size or nonrigid copy (b below), or
with a negative or a colored transparency (c below).
a. Standard size rigid copy.
To load the easel with standard size
rigid copy, proceed as follows:
(1) Select the mask that matches the size of the copy.
Mask sizes
available (figure 11) are 3 1/4" x 4", 4" x 5", 5" x 7", 8" x 10", and 11" x
14".
(2) Secure the mask (or masks) to the front of the easel (figure 12).
(3) Secure the copy within the mask with the clips provided at the
corners.
28
Previous Page
