print processor squarely.
With a 14-inch wide print, use an edge of the
feed shelf to align the print squarely with the rollers.
CAUTION:
To avoid chemical contamination of the feed shelf, do not
allow developed prints to come in contact with the feed
shelf or housing assembly as they are removed.
FIGURE 3-15.
Feeding and removal of prints from print processor.
c. Removal of developed prints from print processor. As the developed
print emerges from the print processor (figure 3-15), grasp the lead edge of
the print and apply slight tension to be certain the trail edge is pulled
free
204
Previous Page
