(6) Remove the housing assembly from the print processor by lifting
the housing assembly upward from the front and then lifting it rearward
until the hinge shaft (figure 3-9) is free of the brackets (figure 3-10).
(7) Depress and hold down the drain bellows, as shown in figure 3-16,
until both used chemical solutions have drained from the solution tray into
their respective drain bottles.
FIGURE 3-16.
Emptying drain bottles.
(8) Disengage the gear latch (figure 3-2).
Raise the left side of
the solution tray by the handle (figure 3-3).
206
Previous Page
