(3) Disconnect the quick-release ground connector (C) between the
mounting base (D) and the rear of the receiver-exciter (E).
(4) Disconnect the audio cable from the lower AUDIO connector (F) on
the front of the receiver-exciter (E).
(5) Disconnect the RF cable from the BNC connector (G) on the front
of the amplifier-coupler (B).
(6) Disconnect the handset or telegraph key from the upper AUDIO
connector (H) on the receiver-exciter (E).
(7) Loosen the fasteners (I) from the hooks located on the front of
the receiver-exciter (E) and amplifier-coupler (B) until the fasteners (I)
can be disengaged from the hooks.
(8) Slide the latched receiver-exciter (E) and the amplifier-coupler
(B) units forward to disengage retaining cleats and lift them from the
amplifier-power supply (J).
(9) Lay the latched receiver-exciter (E) and the amplifier-coupler
(B) on a flat surface, and unfasten the front and rear latches
(respectively) securing the receiver-exciter and amplifier-coupler together.
(10) Carefully separate the receiver-exciter (E) from the amplifier-
coupler (B).
54
Previous Page
