c. Test procedure 14.
Disconnect the CX-4723 from J801.
Using the meter, measure the DC voltage between pins A and H of
the CX-4723 (TP1 of Figure 35).
If the meter display shows 22-30 volts DC, the C-2298 is bad.
Send to IDS for repair.
If no DC voltage is measured between pins A and H, the C-2298 is
not bad and more tests are needed.
Figure 35.
Voltage measurement between pins A and H of plug
P801 on the commander's CX-4723.
37
Previous Page
