c. Input power. Input power from the MT-1029 is also applied to the
MT-1898 (Figure 46).
Input power at the MT-1029 is applied to J23 pin B
(through the CX-4721), to J11 pin B of the MT-1898, and to E14. If the link
is changed to E-14, the R-442 can be turned on independently of the RT.
Additionally, input power is applied to J13 pin B in the MT-1898. When a
mini-suppressor is used, voltage is applied through the suppressor through
the 50 amp fuze, to ground in A of J13 protecting the R-442. (Trace these
circuits on your system diagram.)
Figure 46.
Input power to MT-1898.
49
Previous Page
