d.
Hold a fresh roll of film with
left thumb and index finger so that
the film tab is inside your left
palm
(fig
1-17).
Insert
the
cassette into the
camera, while
holding the film tab.
Figure 1-17.
Insert Cassette.
e.
After the cassette is placed in
position, push the rewind (shaft)
crank
back
into
the
original
position
(fig
1-18).
While
maintaining a slight pressure on the
handle with your right hand, bring
the film tab across to the left
side.
Figure 1-18.
Push Rewind Crank.
f.
Insert the film tab into one of
the slots in the take-up spool, and
at the same time, make sure that the
film perforations are aligned with
the sprockets in the camera to
insure proper film advance (fig 1-
19).
Figure 1-19.
Insert Film Tab.
15
Previous Page
