g.
Once the film tab is inserted
into the film take-up spool, and to
visually insure proper film advance,
turn the film advance lever to the
right
while
holding
the
film
cassette down with your right hand,
(fig 1-20); this will insure proper
tension on the film. Visually check
the
film
advance
during
lever
movement.
Figure 1-20.
Turn Film Advance
Lever.
h.
After having insured that the
film is properly threaded in the
camera, take the camera back cover
and reinsert it, left side first,
into the camera, making sure that
the cover sits correctly in the
grooves(fig 1-21).
Holding it in
place with the left hand, carefully
close it with the right hand.
Make
sure that the cover is COMPLETELY in
place on the right side before
closing
the
camera
case
latch,
otherwise the camera will NOT be
light tight and the film will become
fogged from the outside.
Figure 1-21.
Replace Back Cover.
16
Previous Page
