Figure 5.
AM-6879 amplifier-converter.
HIGH VOLTAGE IS USED IN THE OPERATION OF THIS EQUIPMENT.
DEATH ON CONTACT OR
SEVERE ELECTRICAL SHOCK MAY RESULT IF PERSONNEL FAIL TO OBSERVE SAFETY PRECAUTIONS.
LEARN THE AREAS OF HIGH VOLTAGE IN EACH PIECE OF EQUIPMENT.
BE CAREFUL NOT TO
CONTACT HIGH VOLTAGE CONNECTIONS WHEN INSTALLING OR OPERATING THIS EQUIPMENT.
g. Radio frequency amplification is furnished by the AM-6545/GRC-193
(Figure 6). The FAN/LAMP TEST switch (S1) and two circuit breakers (CB1 and CB2)
are located on the front panel. The S1 switch is a push-button switch that causes
the light-emitting diodes (LEDs) DS1 to DS6 to light when pressed with the RT in
VTR or DTR position. Also, the S1 switch (when pressed) turns on the cooling fan.
This acts as a visual indicator, as well as
5
Previous Page
