(4) Attach power cable leads and ground as follows:
n. Inspect the fuel selector valve.
Ensure valve is set to
INTEGRAL TANK position.
NOTE:
If auxiliary fuel source is to be used, proceed
to (1) through (3) below.
(1) Connect auxiliary fuel line to the generator set auxiliary
fuel supply connection located below the integral tank filler cap.
(2) Connect the other end of the auxiliary fuel line to the
auxiliary fuel source.
(3) Place the FUEL SELECTOR switch to the AUXILIARY position.
o. Close generator access door and ensure that door is secured in
place. (See Figure 50.)
p. Refer to Table 8 and perform before operation PMCS.
91
Previous Page
