Figure 19.
Connector-cable location diagram.
a. Verify that all connections to the installation
kit
have
been
completed as outlined in the installation instructions.
b. Connect the power cable (part of the installation kit) to connector
J101 (A) on the rear of the amplifier-power supply.
c. Connect the AN/PRC-104(A) power cable (B) from connector J104 (C),
located on the rear of the amplifier-power supply, to the AN/PRC-104(A)
power input connector (D) on the rear of the amplifier-coupler (part of
AN/PRC-104(A)).
CAUTION
DO NOT CONNECT THE AUDIO CABLE (E) TO LOWER AUDIO SPEAKER CONNECTOR (F) ON
THE AMPLIFIER-POWER SUPPLY. OTHERWISE, CONTINUOUS
25
Previous Page
