LESSON 1
Figure 1-15.
Housing Assembly
(6) Insert the Feed Shelf through the processor housing (fig 1-16) by
tilting the front upward and inserting the shelf as far as it will go, then
lower the assembly. This hooks each end of the shelf to the tie rod (fig 1-
14).
Figure 1-16.
Feed shelf
(7) Install chemical supply bottles.
After removing the caps from
the one-quart solution bottles, install a solution level valve to each
bottle as shown in Figure 1-17.
Tighten each valve securely. To prevent
the contamination of the solutions, always use the black solution valve with
the activator and the red valve with the stabilizer.
39
Previous Page
