g. Test procedure 4. Disconnect the CX-13089 from J2 on the MX-7777B
and read the meter display.
If the meter shows zero ohms, the MX-7777B is bad.
Send to IDS
for repair.
If the meter shows infinite ohms, the MX-7777B is not bad and
more troubleshooting is needed (Figure 23).
NOTE:
Reconnect CX-13089 to MX-7777B J2 to continue the checks.
Figure 23.
CX-13089 disconnected from MX-7777B.
24
Previous Page
